AMX Optima Instruction Manual page 107

Wiring Sources
Source devices will require either balanced (differential) or unbalanced (single-ended) connections.
Options for wiring between the sources and the input connectors are illustrated in FIG. 59 below. More
than one of these options can be used in the same system. For balanced and unbalanced wiring details,
see FIG. 58 on the previous page.
FIG. 60
Options for source-to-Optima 5-Term wiring
To attach outputs and power to the RX Module:
1.
Fasten the HD-15 cable (FIG. 61) onto the Video Output connector.
FIG. 61
CatPro RX Module connectors and audio wiring
2.
Wire the audio connector (FIG. 60 right shows unbalanced audio).
3. Insert the RJ-45 connector into the CAT-5 receptacle.
4.
If using the provided power supply – Plug the desktop power supply into the power jack on the
module and into an AC external power source.
Or
If you are providing the power supply – Plug the power cord from a UL (or equivalent) listed power
supply into the power jack on the module. The electrical ratings must meet those indicated in the
specifications table (see page 98).
Optima Instruction Manual
Audio
Power
RJ-45
RGBHV+Stereo to CatPro I/O Boards (with RX Modules)
gray = ground
HD-15 Unbalanced audio
101