Chapter 35: Lacp Commands; Table 46. Lacp Port Trunk Commands - Allied Telesis AT-9000/28 Command Line User's Manual

Chapter 35
LACP Commands
Command
"CHANNEL-GROUP" on page 454
"LACP SYSTEM-PRIORITY" on
page 456
"NO CHANNEL-GROUP" on
page 457
"PORT-CHANNEL LOAD-BALANCE"
on page 458
"SHOW ETHERCHANNEL" on
page 460
"SHOW ETHERCHANNEL DETAIL"
on page 461
"SHOW ETHERCHANNEL
SUMMARY" on page 462
"SHOW LACP SYS-ID" on page 463
"SHOW PORT ETHERCHANNEL" on
page 464
The LACP port trunk commands are summarized in Table 46.

Table 46. LACP Port Trunk Commands

Port Interface
Global
Configuration
Port Interface
LACP Port
Trunk Interface
Privileged Exec
Privileged Exec
Privileged Exec
Privileged Exec
Privileged Exec
Mode
Creates new aggregators and adds
ports to existing aggregators.
Sets the LACP system priority value
for the switch.
Removes ports from aggregators and
deletes aggregators.
Sets the load distribution method.
Displays the ports of the aggregators
on the switch.
Displays the states of the ports of the
aggregators.
Displays detailed information about
the aggregators.
Displays the LACP priority value and
MAC address of the switch.
Displays the LACP port information.
Description
453