Displaying Static Port Trunks - Allied Telesis AT-9000/28 Command Line User's Manual

Alliedware plus version 2.1.2 management software for layer 2-4 gigabit ethernet ecoswitches

Hide thumbs Also See for AT-9000/28:

Table of Contents

Displaying Static Port Trunks

Section V: Port Trunks

To display the member ports of static port trunks, use the SHOW STATIC-

CHANNEL-GROUP command in the User Exec mode or Privileged Exec

awplus# show static-channel-group

Here is an example of the information.

% Static Aggregator: sa1

% Static Aggregator: sa2

Figure 79. SHOW STATIC-CHANNEL-GROUP Command

To view the load distribution methods of static port trunks, display the

running configuration with "SHOW RUNNING-CONFIG" on page 129.

AT-9000 Switch Command Line User's Guide

At-9000/52 At-9000/28sp