Chapter 41: Lacp Commands; Table 60. Lacp Port Trunk Commands - Allied Telesis AT-9000 Series User Manual

Chapter 41
LACP Commands
Command
"CHANNEL-GROUP" on page 620
"LACP SYSTEM-PRIORITY" on
page 622
"NO CHANNEL-GROUP" on
page 623
"PORT-CHANNEL LOAD-BALANCE"
on page 624
"SHOW ETHERCHANNEL" on
page 626
"SHOW ETHERCHANNEL DETAIL"
on page 627
"SHOW ETHERCHANNEL
SUMMARY" on page 629
"SHOW LACP SYS-ID" on page 630
"SHOW PORT ETHERCHANNEL" on
page 631
The LACP port trunk commands are summarized in Table 60 and
described in detail within the chapter.

Table 60. LACP Port Trunk Commands

Port Interface
Global
Configuration
Port Interface
LACP Port
Trunk Interface
Privileged Exec
Privileged Exec
Privileged Exec
Privileged Exec
Privileged Exec
Mode
Creates new aggregators and adds
ports to existing aggregators.
Sets the LACP system priority value
for the switch.
Removes ports from aggregators and
deletes aggregators.
Sets the load distribution method.
Displays the ports of the aggregators
on the switch.
Displays the states of the ports of the
aggregators.
Displays detailed information about
the aggregators.
Displays the LACP priority value and
MAC address of the switch.
Displays the LACP port information.
Description
619