Deleting Vlans - Allied Telesis AT-9000/28 Command Line User's Manual

Alliedware plus version 2.1.2 management software for layer 2-4 gigabit ethernet ecoswitches

Hide thumbs Also See for AT-9000/28:

Table of Contents

AT-9000 Switch Command Line User's Guide

Deleting VLANs

To delete VLANs from the switch, use the NO VLAN command in the

VLAN Configuration mode. You can delete only one VLAN at a time and

you cannot delete the Default_VLAN. The untagged ports of deleted

VLANs are automatically returned back to the Default_VLAN. Here is the

format of the command:

This example deletes the VLAN with the VID 12:

awplus> enable

awplus# configure terminal

awplus(config)# vlan database

awplus(config-vlan)# no vlan 12

Section VII: Virtual LANs

At-9000/52 At-9000/28sp