Status Leds; Power Requirements; Internal Power Supply; External Power Supply - Allied Telesis AT-FS716 Installation Manual

Status LEDs

Table 2 lists the status LEDs for the AT-FS716 Series and AT-FS724i switches.
LED
POWER
LINK/ACTIVITY
100M
FDX
(Full-duplex)

Power Requirements

Internal Power Supply

The AT-FS716 and AT-FS724i use a universal internal switching power supply
with 100 to 240 V AC, 50/60 Hz, 0.5A input rating. Allied Telesyn ships power
cords with these units to the U.S., Continental Europe, and the U.K. The
switches require input of 100 to 240 V AC. The AT-FS716 and AT-FS716E
switches have a maximum power consumption of 8W. The AT-FS724i switch
has a maximum power consumption of 15W.

External Power Supply

The AT-FS716E uses an external power adapter which is included with the
unit.
Table 2 Status LEDs
Color Description
Green Power is applied to the switch.
Green A valid link has been established on the port.
Blinking The port is transmitting data.
OFF A link has not been detected on the port.
Green The port is operating at 100 Mbps.
OFF The port is operating at 10 Mbps.
Green The port is operating in full-duplex mode.
OFF The port is operating in half-duplex mode.
AT-FS716 Series and AT-FS724i Installation Guide
3