To Perform Application Test - Agilent Technologies B1500A Self-Paced Training Manual

To Perform Application Test

Test Record List area
Step 1: Click Application Test tab.
Step 2: Select one or more technology categories, and select a desired test from the list of tests
associated with the selected technology categories.
Step 3: Change the setup parameters (Device parameters and Test parameters) if you want.
Step 4: Connect DUT, and click the Single button. The B1500A starts the selected test.
After the test, the test result data is displayed on the Data Display window. And the Test Result
Editor is also displayed on the lower left area of the B1500 screen. See the next page.
Step 5: Analyze the measurement result data.
The measurement result record is automatically stored in the internal hard disk drive.
2-11