Agilent Technologies B1500A Self-Paced Training Manual page 139

To Set User Functions/Analysis Functions
Function Setup
Click the Function Setup tab to display the User Function/Analysis Function setup screen.
The user functions can be displayed on the X-Y Graph Plot, List Display, and Parameters area of
the Data Display window. Up to 20 functions can be set.
•Name: Function name
•Unit: Unit of the function
•Definition: Definition of the function. The following identifiers can be used.
•Variables for the measurement/output data used in this test
•Functions defined in the above lines
•Local variables passed from the application test that calls this test as a component
•Built-in functions and global variables
For details, see online help or
The analysis functions can be displayed on the Parameters area of the Data Display window. Up
to 20 functions can be set.
•Name: Function name
•Unit: Unit of the function
•Definition: Definition of the function. The following identifiers can be used.
•Variables for the measurement/output data used in this test
•Functions defined in the above lines
•Local variables passed from the application test that calls this test as a component
•Built-in functions and global variables
•Read out functions
For details, see online help or User's Guide.
Data calculation
-Measurement data/source data
-Built-in function, etc.
Data calculation
-Measurement data/source data
-Read out function
-Built-in function, etc.
.
User's Guide
5-32