Agilent Technologies B1500A Self-Paced Training Manual page 103

To Use Auto Analysis Function
Marker
This area sets the marker automatically displayed and moved to the specified position after the
measurement.
Check Enable box to enable the marker.
For Condition, enter a variable name and a condition expression to specify where you want the
marker to display.
For After, check this box to enable the additional condition. And enter a second variable and
condition expression. This sets up a search start condition for finding specified point.
For example, you can specify the following expressions to search for a measurement point that
satisfies the first condition after the second condition is satisfied.
Condition: [DGM] = [MAX(DGM)*0.01] [x] After [DGM] = [MAX(DGM)]
Interpolation
Line 1 setup
Line 2 setup
Marker setup
4-24