Agilent Technologies B1500A Self-Paced Training Manual page 59

Graph Analysis Tools
Hold this layer
Close All Displays
Switch Display Mode
Close this layer
Layer selection tab.
Y1
This example has
three layers.
If the append measurement is performed, the data display layer is added to the Data Display
window. In this example, the Data Display window has three layers.
Use the icons shown above to organize the data display layers.
Switch Display Mode icon switches the mode, overwrite or append.
In the overwrite mode, the data is displayed in a new Data Display window.
In the append mode, the data is displayed on a new display layer in the present Data Display
window.
The Data Display window can hold up to 10 display layers. And the earliest layer over 10 will be
automatically deleted. The Hold this layer icon is available when the window holds at least two
layers. If this icon shows the standing pin, the layer will be held. If this icon shows the laid pin,
the layer can be deleted. Double clicking the tab gives the same result as this icon.
3-6