Agilent Technologies B1500A Self-Paced Training Manual page 178

If You Define Application Test Output
• Defining Test Output
Step 1. To define analysis parameters
Step 2. To set display parameters
• Reading test setup internal parameters
Case 1. To use External Variables Setup dialog box
Case 2. To use built-in functions
If you want to get the output of the application definition, define analysis parameters and set
display parameters in the Test Output tab screen. See the following pages.
You can read the value of parameters/variables used in the Application Test setup or Classic Test
setup defined in a test contents. To do so, use the External Variables Setup dialog box or built-in
functions. The read values can be used for the calculation of test result and the display and
record of calculation result.
6-21