Tc Set - Focus FS-100 User Manual
Portable dte recorder
Hide thumbs
Also See for FS-100:
- User manual (126 pages) ,
- Quick start manual (14 pages) ,
- Workflow manual (9 pages)
Table of Contents
Advertisement
FS-100 Functions
TC SET
The Timecode Set parameter stores a user defined timecode in the
FS-100's non-volatile memory. This value is available for use by the
FS-100 immediately after exiting
•
TC FREE RUN
The FS-100 uses this value on the next recording after it is set
in
TC SET
•
TC REGEN
This is the starting value when using an empty hard disk
drive for recording.
•
TC REC RUN
This is the value used to begin every recording session after a
power cycle.
FS-100 Portable DTE Recorder
62
TC SET
00 : 00 : 00 : 00
HH : MM : SS : FF
.
BACK
.
TC SET
Advertisement
Table of Contents
