TC SET FS-4
The Timecode Set parameter stores a user defined timecode in the
FS-4 Pros's non-volatile memory. This value is available for use by
the FS-4 Pro immediately after exiting
•
TC FREE RUN
The FS-4 Pro uses this value on the next recording after it is
set in
TC SET
•
TC REGEN
This is the starting value when using an empty hard disk
drive for recording.
•
TC REC RUN
This is the value used to begin every recording session.
Pro only
TC SET
00 : 00 : 00 : 00
HH : MM : SS : FF
FS-4 Pro only
.
FS-4 Pro only
FireStore Functions
BACK
.
TC SET
61