Tc Set; Ub Set; Tc Mode - Focus FS-T1001 User Manual

TC SET

Used to preset the TC (timecode) value on FS-T1001. This value is
available for use by the FS-T1001 immediately after exiting
.
SET
Using the TC SET Value
•
EXT TC
•
FREE RUN
•
REGEN
•
REC RUN
new recording.
For more information see
1440 - Sets the HQ (35Mb/s) frame size to 1440x1080
1920 - Sets the HQ (35Mb/s) frame size to 1920x1080
TIMECODE on page 22.
Default is
00:00:00:00

UB SET

Use to preset the UB (user bit) value for recordings.
Professional applications employ user bits to assist in post
production. For example, when multiple cameras are used during a
shoot, each FS-T1001 has a unique UB setting that identifies it and
the camera it serves. Later, the user bits are used to determine
which camera recorded the video clip..
Default is
00:00:00:00

TC MODE

Use to set the timecode mode to either DROP frame or NON-
DROP frame (60Hz mode only). When using EXT TC mode this
setting has no effect because the FS-T1001 follows the timecode
mode within the incoming RP188 timecode in the HD-SDI stream.
– preset TC value is not used.
- preset TC value continuously increments.
- preset TC value is not used.
– preset TC value is used as the start value for a
HQ
.
.
FS-T1001 Menus
1080i
FS-T1001 Media Recorder - 27
TC