Saving Loop Record Clips; Snap Record - Focus FireStore FS-4 Pro User Manual

• The size of the video clip depends on the length of the
loop.
• Loops of 60 minutes or less are recorded in one-minute
clips.
• Loops greater than 60 minutes, are recorded in 2GB clips.
• When the capacity of the disk is reached, one additional
clip is created. The size of the last clip depends on the
length of the loop i.e., one-minute or 2GB. The disk must
have at least 30 minutes of disk space available for this
functionality.

Saving Loop Record Clips

Press
STOP
The FS-4 HD stops recording and saves the current LOOP
RECORD session clips to a folder on the disk.

Snap Record

Use SNAP to record individual frames. In Snap mode, pressing
captures a single frame. Each record SNAP session
Record
captures the individual frames into a single file. To start a new
SNAP record session place the unit in
records.
• SNAP Record is available only in DV modes of
operation.
• Use SNAP in
modes.
• Removing power from the FS-4Pro HD in the midst of a
Snap recording session causes the FS-4Pro HD to
return to Normal recording mode when it powers back
up.
Another Method to Capture Single Frames
An alternative to Snap is EXT CTL FRAME. For more information see
EXT CTL OFF, Pause, Frame, File
FS-4 HD and FS-4Pro HD Portable DTE Recorders
during a record session.
FS-4Pro HD, DV modes only
,
Local Syncro Slave
between SNAP
STOP
, and
Tapeless
on page 66.
FS Functions
control
55