Powering The Fs-4 Hd; Connecting The Fs-4 Hd To Ac Power - Focus FireStore FS-4 Pro User Manual

Powering the FS-4 HD

• The FS-4 HD operation without a battery installed.
To operate the FS-4 HD without a battery installed,
connect the unit to an AC power source.
• Before operating the FS-4 HD with battery power.
It is first necessary to fully charge the battery. An
uncharged battery, typically takes 2-3 hours to charge.

Connecting the FS-4 HD to AC Power

Attach the AC power cord to the FS-4 HD (with or without
battery installed). The FS-4 HD is immediately ready for
operation.
To do this, connect the AC power as follows:
Battery Pack
1. Plug the cord from the power supply into the bottom of the FS-4
HD.
2. Connect the line cord to the rectangular power supply
(International models only).
3. Plug the line cord or AC adapter into an electric outlet.
FS-4 HD and FS-4Pro HD Portable DTE Recorders
Quickstart
DC Power Port
DC Cable
19