TIME CODE EXT, REC RUN, FREE RUN, REGEN
The FS-4Pro HD provides additional
and
TC REGEN
functionality is only active when HD FORMAT is set to
. In M2T mode, all TC modes act as
QUICKTIME
The following are timecode (
•
TC EXT
Records the incoming source timecode. If the timecode
is not running, and the FS-4 HD records the same
timecode number in each recorded frame. Choose
mode to clear any stored number.
EXT
•
TC REC RUN
This function creates a time code number for the first
frame of the next recording. To do this it can either:
•
FS-4 HD
Take the last timecode recorded and add 1,
•
FS-4Pro HD
Use the value stored in
The FS-4 HD stores the last recorded timecode in its non-
volatile memory, so it can persist across recording sessions.
•
TC FREE RUN
This function causes the FS-4Pro HD to begin counting
from the value stored by
•
A number entered through
available to the FS-4Pro HD until exiting
then does the FS-4Pro HD begin counting using that
number.
FS-4 HD and FS-4Pro HD Portable DTE Recorders
functionality in HD RECORDER mode. This
Group Default
DV mode or FS-4Pro HD only
FS-4Pro HD only
TC REC RUN
) functions.
TC
.
TC SET
.
TC SET
TC SET
FS Functions
,
TC FREE RUN
.
TC EXT
is not stored and
. Only
TC SET
,
TC
67