Log Files
With each recording of a particular clip on a disk, the FS-4 HD
creates a text log file to identify information about the recorded
clip and the recording session. Information includes:
• Clip name
• Clip in/out source TC values
• Clip duration
• Clip type (record file type).
The log file also identifies when the shock cache becomes low
and when disk or other errors occur during a recording.
Error Messages
Error messages may appear on the FS-4 HD LCD display from
time to time. The purpose of these messages is to alert you to
action that may effect your FS-4 HD operation. Below is a list of
error messages and actions you can take:
Error Message
LOW BATTERY!
HIGH
TEMPERATURE!
NO SPACE LEFT!
DISK ERROR
XXX
NO DISK
DETECTED
WRONG
PRODUCT ID
FILE NOT FOUND
TRK LIMIT MAX!
FS-4 HD and FS-4Pro HD Portable DTE Recorders
Description
Battery power is low.
The unit is getting too hot
for normal operation.
The Disk Drive is Full.
Lost Disk Communication.
Lost Disk Communication.
Incorrect Software Loaded.
Wrong filename or missing
file.
999 clips exist on system.
Technical Specifications
Action
Connect AC Power or replace the
battery pack. When the unit is run
without the battery installed, this
warning can be displayed, that is
normal.
Make sure the vent and fan intake
holes are clear.
Transfer files off the drive and format it
before attempting to do more
recording.
Contact Focus Enhancements
Technical Support.
Contact Focus Enhancements
Technical Support.
Download correct software and
perform upgrade again.
Check filename or that upgrade file
exists.
Copy content from FS-4 HD hard drive
and re-format.
101