Syncro Slave Recording; Recording Timecode In The File - Focus FireStore FS-4 Pro User Manual

Quickstart

Syncro Slave Recording

Syncro slave recording allows the FS-4 HD to mimic
camcorder operations by monitoring the state of the
camcorder's tape recorder controls.
1. Verify that the FS-4 HD is in
2. From the FS-4 HD Home screen, press the
button several times until the Control screen appears:
3. Use the
dash on the left side of an item indicates it is the current
selection. The default value is
4. Press the
5. The beginning screen returns and a
appears in the upper left-hand corner. Next to this symbol,
is a
Y
camcorder's tape controls, i.e. record when the camcorder
records and pause when it pauses.
6. Now the FS-4 HD will respond to the camcorder's tape
controls. The recording signal goes both to the tape in the
camera and to the FS-4 HD.

Recording Timecode in the File

Select
EXT TC
camera timecode in the file. For other available timecode options
refer to
TIME CODE EXT, REC RUN, FREE RUN, REGEN
67,.
Function buttons
The tasks discussed above are available for programming into the function
buttons. For information on setting up function buttons, refer to the section,
Functions Screen
30
CONTROL
LOCAL
AV / C
-SYNCRO SLAVE
TAPELESS
navigation button to select
Down
navigation button.
Select
indicating that FS-4 HD is following the state of the
in the Setup menu. This option records the video
on page 72
FS-4 HD and FS-4Pro HD Portable DTE Recorders
mode.
STOP
Right
Syncro Slave
.
Local
indicator
Pause
navigation
. The
on page