Retro Disk Record Mode; Loop Record - Focus FireStore FS-4 Pro User Manual

FS Functions

Retro Disk Record Mode

The Retro Disk mode records video in a continuous loop to a
user-defined portion of disk space. Pressing Record
seamlessly begins active recording. The Retro Disk session is
appended to the beginning of the new clip. The result is a set of
clips beginning with the cached video and continuing with the
newly recorded video.
• When calculating the amount of hard disk space
needed for a Retro Disk record session, always include
additional space beyond the recording requirements.
The added space depends on the length of the loop.
• Loops less than 60 minutes, need an additional 1 minute
of unused disk space.
• Loops 60 minutes and greater, require an additional 2GB
of unused disk space.
• When looping less than one hour, Retro Disk records
the loop in a series of 1 minute clips.
• Retro Disk is available in Normal, Syncro Slave and
Tapeless control modes.
• When Retro Disk is set, the symbols
appear in the FS-4Pro HD display.

Loop Record

Loop Record is similar to Retro Disk.
Loop Record continuously records a series of video clips to
available disk space. When all available disk space is used,
Loop Record begins sequentially replacing the earliest clip
with the most recent.
54
RETRO DISK
00:00
HH:MM
FS-4Pro HD only
FS-4 HD and FS-4Pro HD Portable DTE Recorders
FS-4Pro HD only
This line is not active:
reference only.
BACK
(Record and L)
L