Table of Contents
Advertisement
Quick Start
Inserting and Removing SxS Media
Inserting SxS Media Into FS-T1001
FS-T1001 is compatible with SxS media. Check the Focus FS-
T1001 product page (www.focusinfo.com) for the latest list of
qualified media. SxS media with available space must be inserted
into the FS-T1001's ExpressCard 34 slot in order to use the product.
If being used for recording, make sure the SxS card's write
protection feature is switched off.
To insert SxS Media into FS-T1001, follow these steps:
Remove the SxS polymer dust cover by lifting it from
1.
the lip at its base.
Insert the SxS card with its backside label facing the
2.
FS-T1001 Scroll-pad.
The card is keyed so that it will only insert in the
correct orientation. Never force the card into the slot.
Reinstall the polymer dust cover.
3.
Removing SxS Media from FS-T1001
To remove SxS media from FS-T1001, follow these steps:
Remove the SxS polymer dust cover by lifting it from
1.
the lip at its base.
Release the SxS card.
2.
Press on it firmly and release. The card disengages and
springs forward.
Grasp the card and pull it from the unit.
3.
Replace the polymer dust cover.
4.
Safely Ejecting SxS Media
It is necessary to safely eject SxS media in order to avoid
possible corruption of content on the card. To safely eject a
card, navigate to the UTILITIES -> EJECT MEDIA menu item or
hold down the HOME key (when on the home screen) for 3
seconds.
8
- FS-T1001 Media Recorder
Advertisement
Table of Contents
