Disp (Display) Information Fields - Focus FireStore FS-4 Pro User Manual

FS Functions
10.
Reel Display
In
Record
REEL that a clip is located in or, has been marked to. If in
PLAY FROM
brackets for example, <REEL>. This area is blank if NO
REEL has been selected.
11. information field that displays data type.
DISP
12. information field that displays current data.
DISP

DISP (display) Information Fields

Use the
DISP
information fields 11 and 12. The data shown depends on
the mode of operation, i.e. DV or HD Recorder.
Pressing the
category of information. Below is a table of the data types
and data available with
Field
Number
11
12
11
12
11
12
11
12
11
50
FS-4Pro HD only
or modes, this item displays the particular
Playback
>
REEL LIST
function button to display current operation
button advances the display to the next
DISP
DISP
Data Type /
Data Description
COUNTER
Shows frame count of current video clip during record or
playback.
REMAINING
Record: counts down number of available frames
remaining, as time, on a specific disk.
Playback: displays time remaining of the current clip.
DV (NTSC or PAL) or HD (see note following table)
Record: displays the external timecode value being
generated by a camcorder or other device during a
recording session. Timecode mode must be set to
TC for this function to operate, refer to
EXT, REC RUN, FREE RUN, REGEN
Playback: displays the embedded DV timecode value in
a particular track.
UB NTSC
Displays the set user bit value in a particular clip. A user
bit value must be added for this to display, refer to
SET (FS-4Pro HD only)
ABSOLUTE
FS-4 HD and FS-4Pro HD Portable DTE Recorders
mode, the REEL appears in
.
on page 69.
EXT
TIME CODE
on page 67.
UB