Mounting The Fs-4 Hd (Macintosh) - Focus FireStore FS-4 Pro User Manual

Using the FS-4 HD with a Computer

Mounting the FS-4 HD (Macintosh)

1. Start the Mac computer and connect the FS-4 HD's
port to the computer using a standard 6-pin to 6-pin FireWire
O
cable.
When mounted, the FS-4 HD should appear on the computer's
desktop as shown below:
The FS-4 HD appears as a FAT32 volume with a PC label.
2. Locate the FS-4 HD on the desktop and open it up.
3. Open the folder with the most recent date code (for example,
20050127-110345-01). It should look similar to the following:
Before Connecting FS-4Pro HD to a Computer
If clips have been assigned to a Reel folder: perform an Organize
Reels before connecting the unit to a computer.
42 FS-4 HD and FS-4Pro HD Portable DTE Recorders
COMPUTER I/