Setting Up Master And Slave Fs-4 Hd - Focus FireStore FS-4 Pro User Manual

Setting Up Master and Slave FS-4 HD

1
Master FS-4 HD
STOP 1 - 001
COUNTER
00 : 00 : 00 : 00
DISK 1
SYNC DISP LOCK
2
1. Connect the camcorder to the master FS-4 HD,
using the supplied FireWire cable.
2.
Master
Power on unit.
Go to the
HDD Mode
3. Connect the FS-4 HDs through their
using a 6-pin to 6-pin FireWire cable.
4.
Slave
Power on the unit
Go to the
HDD Mode
5.
Master
Begin recording or playback using the master FS-4 HD.
Use DD Drive Mode when Connecting to a PC
It is important to take the master FS-4 HD out of USE EXT FS-4
mode before attempting to connect to a computer.
To do this, select DD DRIVE from the HDD Mode screen.
This returns the unit to hard disk mode.
FS-4 HD and FS-4Pro HD Portable DTE Recorders
000min
menu screen and enable
screen and enable
4
Slave FS-4 HD
CONNECT
COMPUTER THEN
ENABLE BYPASS
SUCCESS
EXIT
DV I/O
USE EXT FS-4
connectors
Computer I/O
.
DD DRIVE
FS Functions
3
connector
.
59