Verifying The Pcns Installation - NEC Express5800/320Ma Software Installation And Configuration Manual

6. Next to Shutdown the system only when the event has lasted this long, type
120. Click Apply.
7. On the Configure Events page, click the button next to Communication: Lost
while On Battery in the Shutdown System column.
8. On the Configure Shutdown page, click the box next to Yes, I want to shutdown
the system to select it.
9. Next to Shutdown the system only when the event has lasted this long,
type 10. Click Apply.
10. Optionally, configure other responses to other events. You can specify whether to:
•
Log selected events in the event log.
•
Notify a user when selected events occur.
•
Run a command file when selected events occur.
•
Shut down the system when selected events occur.
11. On the Configure Events page, in the menu on the left, click Configure
Shutdown.
12. On the Configure Shutdown page, select the Turn off the UPS after the
shutdown finishes check box. Click Apply.

Verifying the PCNS Installation

1. Click Start, point to Programs, click PowerChute Network Shutdown, and then
click User Interface.
2. Log on to the user interface.
3. In the left column, click UPS Information, and then click the name of the UPS (for
example, APC-UPS) to open the management card Web page.
•
If another Web browser opens with the management card Web page, minimize
the new browser and go to step 4.
•
If the attempt to connect to the management card Web page fails, you must
resolve the network connectivity issue. Consult your network administrator,
and see the APC documentation that was shipped with your system.
4. From the PCNS user interface, click Connected Servers.
•
If the Connected Servers page appears with the correct server domain name
and IP address, the installation was successful.
•
If the Connected Servers page does not appear, or if the System Problem
Report page appears, check the communications between the UPS and all of
the servers to which it supplies power. Consult your network administrator, and
see the APC documentation that was shipped with your system.
Connecting a UPS to an Express5800/320Ma System
Verifying the PCNS Installation
A-7