Performing The Remote Management Installation Procedure; Overview Of The Remote Management Installation Procedure; Performing The Rmi Procedure - NEC Express5800/320Ma Software Installation And Configuration Manual

For information about installing remote-management software for Express5800/320Ma
systems on a PC, see the following:
•
"Overview of the Remote Management Installation Procedure" on page 5-1
•
"Performing the RMI Procedure" on page 5-1
•
"Installing Documentation for Express5800/320Ma Systems" on page 5-2
•
"Removing Programs and Documentation" on page 5-3

Overview of the Remote Management Installation Procedure

The remote management installation (RMI) procedure installs ftServer Management
Console (ftSMC) and the Java 2 Runtime Environment (JRE) on a PC that is running
Windows 2000 (any type), Windows Server 2003, or Windows XP. JRE is used by the
Virtual Technician Module (VTM) console.
ftSMC and VTM enables you to monitor and manage Express5800/320Ma systems
from your PC. For information about these tools, see the following:
•
The Express5800/320Ma Virtual Technician Module User's Guide or the online
Help for the VTM console
•
The Express5800/320Ma: System Administrator's Guide and the online Help for
ftSMC

Performing the RMI Procedure

1. Do one of the following:
•
Browse to a local network share that contains the contents of the
Express5800/320Ma ExpressBuilder CD (1 of 2). Open the bin folder and
double-click Setup.hta.
•
Insert the Express5800/320Ma ExpressBuilder CD (1 of 2) into the CD-ROM
drive.
Performing the Remote Management

Performing the Remote Management Installation Procedure

Installation Procedure
Chapter 5
5-
5-1