Verifying That The Software Upgraded Successfully - NEC Express5800/320Ma Software Installation And Configuration Manual

5. When the Installation Completed dialog box appears, click Restart.
Restarting the system activates some of the newly upgraded drivers for
Express5800/320Ma systems. You cannot use ftSMC until the system is restarted.
6. After the system has restarted, log on. The Express5800/320Ma Post Installation
Check window appears for several minutes. Wait until the Post Installation Check
Tool finishes gathering and verifying the information.
7. If the Installation Completed dialog box lists warnings or errors, click View Log.
To find the event that generated the warning or error, search for the word failed in
the log. When you have resolved the errors, click Restart in the Installation
Completed dialog box.

Verifying That the Software Upgraded Successfully

After you upgrade, the post-installation verification tool runs to make sure that the
upgrade was successful and that the system is restored to full operation.
The post-installation verification tool creates a file named
Postcheck_yyyy_mm_dd_hh_mm.txt in the
%ProgramFiles%\Stratus\Customerservice\Installcheck folder on the system drive. In
the file name, yyyy_mm_dd_hh_mm indicates the year, month, date, hour, and minute
when the file was created.
The post-installation verification tool verifies that:
•
Applications for Express5800/320Ma systems are properly installed.
•
Correct versions of drivers for Express5800/320Ma systems are properly installed.
•
The correct compiled ftServer Managed Object Format (MOF) files are present.
•
Services for Express5800/320Ma systems are installed and started, except for
services that run only at system startup.
•
Third-party applications were installed during the upgrade.
•
The system contains the required Microsoft updates (hotfixes).

Verifying That the Software Upgraded Successfully

Upgrading Express5800/320Ma Software 7-7