Performing The Ipl Procedure - NEC Express5800/320Ma Software Installation And Configuration Manual

Table 2-1. Mini-Setup Worksheet (Continued)
Setting Description
Networking If you have a simple peer-to-peer network, you
settings may want to click Typical settings.
To configure advanced network options or add
more services during Mini-Setup, click Custom
settings. If you click Custom settings, another
dialog box prompts you for more information.
Note: To join a domain, first set your networking
settings appropriately. Ask your network
administrator for the correct networking settings.
Workgroup or You must join either a workgroup or a domain.
computer
domain A workgroup is one or more computers with the
same workgroup name. To join a workgroup,
provide a new workgroup name, or use the
workgroup name that Windows suggests during
Mini-Setup.
A domain is a group of computers that are part of
a network, are managed by a domain controller,
and share a common directory database. Joining
a domain requires a computer account in the
domain you want to join. To join a domain during
Mini-Setup, provide the name of an existing
domain, your user name, and your password.

Performing the IPL Procedure

The IPL procedure takes approximately two and one-half (2.5) hours. System
configuration procedures take additional time. See the Express5800/320Ma: Software
Installation and Configuration Guide for information about these configuration
procedures.
Checklist: The IPL Procedure
Prepare for the IPL procedure as described in
page 2-6.
Perform the IPL procedure as described in
page 2-6.
Entry
Check one:
Typical settings: ________
Custom settings: ________
Workgroup or domain:
"Preparing for the IPL Procedure" on
"Performing the IPL Procedure" on
Installing Express5800/320Ma System Software
Performing the IPL Procedure
2-5