Check The First Intake Of Air - Miele KM 404 Installation Instructions Manual

Conversion to another type of gas

Check the first intake of air

a Securing screw
b Air sleeve
Gap X must measure:
6 mm for Natural gas
13 mm for Liquid gas
34
^ If this is not the case, loosen the
securing screw, re-position the air
sleeve and then tighten the securing
screw.
^ Finally secure the jets against
inadvertent loosening with sealing
wax.
^ Re-assemble the hob in the reverse
order.
The flame must not go out in the lowest
setting, or when the control is turned
quickly from a high to a low setting.
In the highest setting the flame must
have a distinctive and visible core.