Fixing the spacer bars
The spacer bar is only required when
combined with another appliance.
^ Position the spacer bars b in the
positions shown in "Fitting the spacer
bars and support brackets" so they
are flush with the top edge of the
cut-out and secure using the
3.5 x 25 mm screws supplied.
^ Then fill in the gap c between the
bars and the worktop with silicone
from the tube supplied.
Installation KM 404 / KM 405 / 406
With granite worktops the spacer bars
b must be positioned and secured with
strong double-sided adhesive tape. In
addition, coat the edges with silicone
and fill in the gap c.
The screws are not required for granite