Fixing The Spacer Bars - Miele KM 404 Installation Instructions Manual

Fixing the spacer bars

The spacer bar is only required when
combined with a 288 mm wide
combiset appliance.
c
^ Position the spacer bars b in the
positions shown in "Fitting the spacer
bars and support brackets" so they
are flush with the top edge of the
cut-out and secure using the
3.5 x 25 mm screws supplied.
^ Then fill in the gap c between the
bars and the worktop with silicone
from the tube supplied.
d
Installation KM 414 / KM 417
Granite worktops
With granite worktops the spacer bars
b must be positioned and secured with
strong double-sided adhesive tape. In
addition, coat the edges with silicone
and fill in the gap c.
The screws are not required for granite
tops.
19