Check The First Intake Of Air - Miele KM 404 Installation Instructions Manual

Check the first intake of air

a Securing screw
b Air sleeve
Gap "X" must measure:
13 mm for Natural gas
13 mm for Liquid gas
Conversion to another type of gas
^ If this is not the case, loosen the
securing screw, re-position the air jet
and then tighten the securing screw.
^ Secure the jets against inadvertent
loosening with sealing wax.
^ Re-assemble the hob in the reverse
order.
The flame must not go out in the lowest
setting, nor when the control is turned
quickly from a high to a low setting.
In the highest setting the flame must
have a distinctive and visible core.
33