Miele KM 404 Installation Instructions Manual page 32

Conversion to another type of gas
Changing the main jet
^ Use an SW 10 socket spanner to
loosen the main jet from its holder, by
turning anti-clockwise. At the same
time use an SW 13 spanner to
counterhold.
^ Screw in the new main jets, once
again using the spanner to
counterhold.
32
Changing the small jets
a Small jet with smaller jet diameter
(e.g. for liquid gas: 0.20).
b Small jet with larger jet diameter
(e.g. for liquid gas: 0.46).
^ Using a small screwdriver, unscrew
both small jets in the gas fitting.
^ Pull the jets out with a pair of pointed
pliers.
^ Select the jets as shown in the table
and fit, reversing the procedure, and
secure.