Step 1: Starting Adaptec Storage Manager - Adaptec Snap Server 700i Series User Manual

Step 1: Starting Adaptec Storage Manager

You need root or administrative privileges to run Adaptec Storage Manager.
Note
You can't run multiple instances of Adaptec Storage Manager on the same system.
Start Adaptec Storage Manager.
1
• On a system running Windows, click
Manager
• On a system running Linux:
Type
a
Manager installation directory.
Type
b
Adaptec Storage Manager opens
and the Login to Management
Service window pops up. If the
Management Service is installed
on the same system as the GUI,
the host name and user name
fields will be automatically filled
in.
Enter the Administrator
2
password you set when you
installed Adaptec Storage
Manager.
If the Management Service is not installed on the local system, enter the name or
TCP/IP address of the system on which the Management Service is installed,
then enter the Administrator user name and password you set when you
installed Adaptec Storage Manager.
If you want to be prompted to log in to the Management Service each time
Note
Adaptec Storage Manager is opened, uncheck the
check box. You might want to do this if some users have user-level access only to
Adaptec Storage Manager. See page 48 for more information.
The wizard opens and the Add iSCSI
Storage Appliance window pops up.
If your iSCSI Storage Appliance
Note
is on a network without a DHCP
server, complete the steps in
"Building an IP SAN Without a DHCP Server" on page 24 before you continue
with this section.
.
, then press
cd /usr/StorMan
, then press
sh StorMan.sh
Chapter 4 Setting Up Your iSCSI Storage Appliance and IP SAN
Step 1: Starting Adaptec Storage Manager
Start > Programs > Adaptec Storage
to change to the Adaptec Storage
Enter
:
Enter
Save user name/password
35