Adaptec Snap Server 700i Series User Manual page 55

Adding a System to the VDS/VSS Host List
To add a system to the VDS/VSS host list:
In the Enterprise View, right-click the
1
, then click
service actions
The Microsoft VDS/VSS Access window opens.
Click .
Add
2
The Enable Microsoft VDS/VSS Access from this
Host window opens.
Enter the host name of the system, then click
3
To find the host name for a system, open a
Note
command prompt window, type
press . Use the displayed host name in the
Enter
Enable Microsoft VDS/VSS Access from this Host window. You can't use the
system's IP address.
The host name appears in the host list.
Repeat Steps 2 and 3 to add more systems to the host list.
4
Click to close the Microsoft VDS/VSS Access window.
OK
5
The systems you added to the host list can now complete jobs through the
Management Service.
If your system has problems connecting to the VDS Provider, see page 141 for
Note
troubleshooting tips.
Removing a System from the VDS/VSS Host List
To remove a system from the VDS/VSS host list:
Open the Microsoft VDS/VSS Access window (see Step 1 on page 49).
1
Select the system you want to remove, then click
2
The system is removed from the host list.
Click to close the Microsoft VDS/VSS Access window.
OK
3
Management Service
Manage VDS/VSS access
hostname
Chapter 4 Setting Up Your iSCSI Storage Appliance and IP SAN
Beginning to Use Your IP SAN
, select
.
.
Add
, then
.
Remove
Management
49