Adaptec Snap Server 700i Series User Manual page 178

iSCSI Configuration for Red Hat or SUSE Linux
Enter responses (shown in the following table) as appropriate to create the
10
partition. If you don't know the correct response, type
command
command action
Partition Number
First cylinder
Last cylinder
command
Create file systems on the partitions so they can be mounted and used for storage.
11
linux:~ #: mkfs -t ext3 /dev/sdb1
Mount the iSCSI volumes and use them as regular disks.
12
linux:~ #: mount -t ext3 /dev/sdb1 /iscsi1
To see a list of the mounted disks, enter:
13
linux:~ #: df -h
You will see output similar to the following:
Filesystem
/dev/hda3
tmpfs
/dev/hda1
/dev/sdb1
172 Snap Server 700i Series User's Guide
n
p
1
<enter>
<enter>
w
Size Used Avail Use% Mounted on
42G 6.3G 36G 16% /
2.0G 16K 2.0G 1% /dev/shm
33G 11G 22G 34% /windows/C
197G 129M 187G 1% /iscsi1
for help.
m
(To create a new partition)
(To select a primary partition)
(Choose the default value)
(Choose the default value)
(Write to disk)