Adaptec Snap Server 700i Series User Manual page 113

To check that the image you selected will be used after the iSCSI Storage
4
Appliance is restarted, select the controller in the Physical Devices View, then in
the menu, select
Actions
Image 2 currently running
Image 1 will run when restarting
In the example above, Image 2 is still the current controller image but Image 1 is
set to be the image the controller will use when you restart iSCSI Storage
Appliance.
Click .
OK
5
Do not make any configuration changes before you restart the appliance.
Caution
Any changes that you make will be lost when the appliance restarts.
Restart the iSCSI Storage Appliance (see page 104).
6
To check that the image you selected is running, select the iSCSI Storage
Appliance in the Enterprise View, select the controller in the Physical Devices
View, then in the
Actions
should be the image you selected.
Image 1 is currently running and
will also run the next time the
iSCSI Storage Appliance is
Updating the Adaptec OnTarget Operating System
Select controller image
menu, select
Select controller image
restarted.
Chapter 9 Maintaining Your iSCSI Storage Appliance
.
. The Current Image
107