Adaptec Snap Server 700i Series User Manual page 166

iSCSI Configuration for Microsoft Windows
Enter the CHAP user name and password (if applicable).
2
If you are using CHAP authentication, click
information
with the logical device. Verify that the
unchecked. Click
Click to return to the main window. The status of the Target in the Targets list
OK
3
changes to
Formatting a Logical Device Using the Windows Disk Management Tool
Open the Windows Computer Management tool.
1
Navigate to
Control Panel >
Administrative
Tools > Computer
Management
select
Disk
Management
wizard opens,
close it and
proceed to the
next step as you
must manually
write the
signature to the
disk.
Initialize the logical device.
2
Right-click the new disk label (Disk 1 in the illustration) and select
(Windows 2000) or
initializes as a Basic disk.
Format the logical device.
3
Right-click the new disk and select
Complete the New Partition wizard, accepting the defaults. Once formatted, the
disk is labeled healthy and is ready for use.
To turn a QLogic QLA4050/4052 disk into a dynamic disk, right-click the disk in
4
the Disk Management window and select
the Microsoft iSCSI initiator, dynamic disks are not recommended.
160 Snap Server 700i Series User's Guide
box, and enter the CHAP user name and password you created along
to return to the Log On to Target window.
OK
.
Connected
, and
. If a
Initialize Disk
Advanced
Perform mutual authentication
(Windows 2003, XP). The new logical device
from the right-click menu.
New Partition
Convert to Dynamic Disk
, click the
CHAP login
box is
Write Signature
. When using