Basic Hardware Shipped With Snap Server 700I Series - Adaptec Snap Server 700i Series User Manual

Basic Hardware Shipped with Snap Server 700i Series

Basic Hardware Shipped with Snap Server 700i Series
In addition to the enclosures and disk drives, the Snap Server 700i Series comes
with these cables and components:
Component
Power Cables
Ethernet Cables
Rack Mount Assemblies
Expansion Cables
Dual Power Supply
190 Snap Server 700i Series User's Guide
Description
Three different power cables are provided for each power
supply. These cables comply with power supply
requirements of these countries:
• United States
• United Kingdom
• Europe
• The Snap Server 720i has three(3) 10/100/1000
Ethernet ports. Three Ethernet cables are supplied.
• The Snap Server 730i and 750i have four (4) 10/100/
1000 Ethernet ports. Four Ethernet cables are supplied.
Note SANbloc S50 expansion arrays connect to a host
Snap Server 700i Series, not directly to the network, and
thus do not ship with Ethernet cables.
Mounting brackets or slide rail assemblies for installing the
server into a standard EIA rack come with every rack-
mountable Snap Server 700i Series. See the next section,
"Basic Hardware To Be Acquired from Third-Party Vendors"
for additional requirements for your Snap Server 700i
Series or expansion array.
A SANbloc S50 expansion array connects to its host Snap
Server 700i Series via a SAS cable. SANbloc S50s come
with one SAS external cable.
The Snap Server 730i and 750i come with dual power
supplies. The Snap Server 720i comes with a single power
supply but can be upgraded to a configuration with dual
power supplies, which can be ordered separately by going
to http://www.snapserver.com
Buy tab.
and selecting the Where to