Adaptec Snap Server 700i Series User Manual page 125

These LEDs operate as described in the following table:
LED Condition
1 N/A
2 Solid green
Solid amber
Off
3 Solid green
Green random flash
Off
APC Unit LEDs
Each APC unit has two LEDs that indicate status.
These LEDs operate as described in the following table:
LED Condition
Power Off
Green (solid)
Fault Off
Yellow (flash)
Yellow (solid)
When an APC unit fails, the enclosure LED on the front of the unit also indicates the
failure.
Using Status and Drive Light Behavior to Monitor Components
Indication
Not used.
Drive present and OK.
Drive failed.
Drive not present
Drive present and idle.
I/O activity on disk drive.
Drive not present.
Fault
Indication
Enclosure not powered on.
APC unit functioning normally.
APC unit functioning normally.
APC unit failure predicted.
APC unit failed.
Chapter 10 Monitoring Status and Activity
Power
119