Adaptec Snap Server 700i Series User Manual page 37

Installing Adaptec Storage Manager
To run Adaptec Storage Manager on Red Hat Enterprise Linux 64-bit, you
Note
must complete a standard installation with Compatibility Arch Support.
To install Adaptec Storage Manager:
Insert then mount the CD:
1
For Red Hat
mount /dev/cdrom /mnt/cdrom
For SUSE
mount /dev/cdrom /media/cdrom
Change to the cdrom directory:
2
For Red Hat
cd /mnt/cdrom/linux/manager
For SUSE
cd /media/cdrom/linux/manager
Extract the RPM package and install it:
3
rpm --install ./StorMan*.rpm
To install the Management Service:
4
# rpm -i asm-mgmt-5.10-<OS-specific RPM>.rpm
where
OS-specific RPM
• asm-mgmt-5.10-1024.sles10.i586
• asm-mgmt-5.10-1012.rhel5.i586
Continue with "Creating an Administrator and Starting the Management
5
Service".
Creating an Administrator and Starting the Management Service
By default, Adaptec Storage Manager includes only one user account, the
Administrator (which allows full access to your IP SAN and all Adaptec Storage
Manager features). You use the Administrator user name and password to log into
the Management Service.
To set up the Administrator account and start the Management Service, as root:
Enter this command:
1
/opt/asm-mgmt/sbin/setup
When prompted, press
2
When prompted, enter a password for the Administrator. When prompted, re-
3
enter the password.
Linux shuts down and restarts the Management Service.
is the rpm for the OS. For example:
to select
Enter admin
Chapter 3 Installing Adaptec Storage Manager
as the Administrator user name.
Installing on Linux
31