Adaptec Snap Server 700i Series User Manual page 84

Limiting Discovery of iSCSI Targets with Auto-discovery Control Lists
Modifying an Auto-discovery Control List
In the Enterprise View, click the iSCSI Storage Appliance you want.
1
In the Logical Devices View, right-click the words '
2
Modify logical devices
The wizard opens. See the figures in "Provisioning Storage Manually" on page 42
for more information.
At the top of the wizard, click the tab of the pool you want, then click
3
The next screen of the wizard opens.
Click
Add Initiator
4
The Add iSCSI Initiator window opens.
Enter the IQN (iSCSI Qualified Name) assigned to the iSCSI initiator installed on
5
your system.
Enter a name (or alias) for the initiator. The name must begin with an alphabetic
6
character, and can contain only letters and numbers.
(Optional—Advanced users only) Click
7
Protocol Data Unit and iSCSI ping settings.
Refer to your iSCSI initiator's documentation for more information about
Note
the advanced settings.
Click .
OK
8
The iSCSI initiator appears in the Initiators drop-down menu.
Repeat Steps 4 to 8 to add more initiators, if required.
9
From the Initiators drop-down menu, select the initiator you want.
10
From the list of logical devices, select the logical device(s) that you want the
11
selected initiator to discover, then click the right arrow (
If you want the selected initiator to discover all the logical devices, click the
double right arrows (
Repeat Steps 10 and 11 for each iSCSI initiator.
12
Each logical device can support up to 32 iSCSI initiators.
Note
78 Snap Server 700i Series User's Guide
.
Right-click here
.
Advanced settings
).
>>
', then select
Logical devices
Next
to enable or disable
).
>
.