System Configuration Summary - Intergraph InterServe 800 SL System Reference Manual

88

System Configuration Summary

The following table summarizes the main features of the system.
Feature
Processors
Memory
Memory Width
Memory Style
Memory Type
Memory Speed
Memory Density
Minimum
Memory
Maximum
Memory
Memory
Expansion
Networking
SCSI
EIDE
Mouse
Keyboard
Graphics
System Disk
Drive
CD-ROM
I/O Slots
Peripheral Bays
Description
Single or dual 266 MHz, 300 Mhz, 333 MHz, 350 MHz, or 400 MHz
Intel Pentium II with external 512 KB cache
Four banks, one DIMM per bank, non-interleaved
72 bits, ECC protected
Industry-standard 168-pin, unbuffered DIMM
SDRAM (Synchronous Dynamic Random Access Memory)
100 MHz for 350 Mhz and 400 Mhz (66 MHz, otherwise)
Single or double density
64 MB (single or dual processor)
1 GB
64 MB, 128 MB, or 256 MB increments
10/100BaseT/TX Ethernet
One dual channel, 16-bit, Fast-20 Wide SCSI-3 controller for internal
SCSI devices, when non-RAID configuration is ordered. Optional
additional controller for external devices
Primary EIDE port for CD-ROM (standard)
Primax 3-Button Mouse
PS/2 style - Standard 104 key
Matrox G100
4.3 GB or 9.1 GB or 18.2 GB 7,200 RPM (Wide Ultra, SMART)
32X (standard) or 4X/2X SCSI CD Writer
Four full-length PCI, one full-length PCI/ISA, one full-length
Accelerated Graphics Port (AGP)
Eight 3.5-inch x 1.6-inch internal bays for system disk and optional
disks
One 3.5-inch x 1.0-inch external bay for floppy drive
One 5.25-inch x 1.6-inch external bay for CD-ROM
Two 5.25-inch x 1.6-inch external bays for optional devices