When Changing The Projector Ip Settings; When Changing Projector Settings - Mitsubishi Electric LAN CONTROL UTILITY Operation Manual

4. Projector Registration

4.2. When changing the projector IP settings

You can change the projector IP settings.
(1) Select the projector which you like to change from the projector list on the main screen.
(2) Click [Assign IP] in the toolbar on the main screen.
• "Assign IP" window is displayed.
(3) To automatically assign an IP address, select [Auto] and then select DHCP. To manually assign
an IP address, select [Manual] and enter values for IP Address, Subnet Mask, and Default
Gateway.
Item
DHCP
IP Address
Subnet Mask
Default Gateway
<Note>
• An error dialog for theft detection may be displayed after the IP settings have been changed.
• If a connection cannot be established after the IP settings have been changed, execute "Search Projector".
• Consult your network administrator about the subnet mask and default gateway in advance.

4.3. When changing projector settings

<Note>
• In the case of the projector that has been auto searched, MAC address and IP address can not be changed.
(1) Select the projector which you like to change from the projector list on the main screen.
(2) Select "Edit Projector Setting" from "Set Configuration" of the menu bar.
Description
Obtain an IP address via a DHCP server.
Enter an IP address.
Enter the subnet mask.
Enter the default gateway address.
13