Visual Pa (Visual Pa Enabled Projectors Only); Starting Visual Pa - Mitsubishi Electric LAN CONTROL UTILITY Operation Manual

9. Visual PA (Visual PA enabled projectors Only)

Visual PA is a feature to display messages on the projector screen.
It can be used for all active Visual PA enabled projectors.
Visual PA is not available when using the projectors listed in page 31.

9.1. Starting Visual PA

(1) Click [Visual PA] in the toolbar on the main screen.
• "Visual PA" window is displayed.
(2) Specify Text, Frame, and Location, enter text, and then click [Send].
• Alphanumerical characters, space, and symbols including ! " # $ % & ( ) + , - _ / : ; < = > ? @ [ ] can be used.
(3) Click [Stop] to stop displaying the message on the projector screen.
<Note>
• If you exit Visual PA while the message is being displayed on the projector screen, a communication error may
occur, and an error window may appear. If this happens, restart Visual PA and click [Stop].
27
Click to exit Visual PA.
Enter text to display messages on
the projector screen.
Choose the color and font.
You can also choose the flash text
option.
Choose the color and pattern of
the frame.
Specify the location of messages.
Choose between Horizontal and
Vertical, and then choose the
relative position.
Click to stop displaying messages.
Click to display messages entered
in the Textbox.
Click to delete entered text in the
Textbox.