When Changing The Projector Ip Settings - Mitsubishi Electric PJLink FD630U User Manual

Lan control utility
Hide thumbs Also See for PJLink FD630U:
Table of Contents

Advertisement

4. Projector registration
<Note>
• Set the default gateways of the projectors and PC correctly. For details, contact your network administrator.
• Be sure to make a note of the IP addresses and default gateways you set. If you forget the setting values, you may
not be able to detect the projectors again.
• At initial setup, DHCP or Auto IP (169.254.0.1 through 169.254.255.254) automatically assigns an IP address.
Note that a different IP address may be assigned every time you start the projectors. If a connection cannot be
established, execute "Search Projector".
• If you change the IP address in the projector menu after the projectors have been detected, execute "Search
Projector" again.
• It is recommended that you assign an IP address of the projector to the fixed IP address.

4.2. When changing the projector IP settings

You can change the projector IP settings.
(1) Select the projector which you like to change from the projector list on the main screen.
(2) Select "Assign IP" from "Configuration" of the menu bar on the main screen.
• "Assign IP" window is displayed.
(3) To automatically assign an IP address, select [Auto] and then select DHCP. To manually assign
an IP address, select [Manual] and enter values for IP Address, Subnet Mask, and Default
Gateway.
Item
DHCP
IP Address
Subnet Mask
Default Gateway
<Note>
• An error dialog for theft detection may be displayed after the IP settings have been changed.
• If a connection cannot be established after the IP settings have been changed, execute "Search Projector".
• If you want to change the IP address of a projector connected via a router, you need to specify a search range of
IP addresses that includes the new IP address in "Search Projector Setting".
• Consult your network administrator about the subnet mask and default gateway in advance.
Description
Obtain an IP address via a DHCP server.
Enter an IP address.
Enter the subnet mask.
Enter the default gateway address.
12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents