When Changing The Projector Ip Settings - Mitsubishi Electric View Global+ User Manual

<Note>
• If you want to connect a projector via a router after automatically detecting it, you need to specify a search range of
IP addresses that includes the projector's IP address in advance.
• Note that a different IP address may be assigned every time you start the projectors. If a connection cannot be
established, specify the projector search range and execute "Search Projector" again.
• If you change the IP address in the projector menu after the projectors have been detected, execute "Search
Projector" again.
• If several projectors with the same IP address are registered, delete the ones which are not connected to the
network from "Edit Projector Setting".

4.3. When changing the projector IP settings

You can change the projector IP settings.
(1) Select the projector which you like to change from the projector list on the main screen.
(2) Select "Assign IP" from "Configuration" of the menu bar on the main screen.
• "Assign IP" window is displayed.
(3) To automatically assign an IP address, select [Auto] and then select DHCP. To manually assign an
IP address, select [Manual] and enter values for IP Address, Subnet Mask, and Default Gateway.
Item
DHCP
IP Address
Subnet Mask
Default Gateway
<Note>
• Even when you change the projector IP settings in the "Assign IP" window, settings of DHCP Function, Start IP
Address, and End IP Address in the projector menu are not changed.
• An error dialog for theft detection may be displayed after the IP settings have been changed.
• If a connection cannot be established after the IP settings have been changed, execute "Search Projector".
Description
Obtain an IP address via a DHCP server.
Enter an IP address.
Enter the subnet mask.
Enter the default gateway address.
EN-12