3. Main screen
ErrorMsg Enable/Disable Display/non-display messages in error message display column can be
Various settings can be configured, such as the new registration and
editing of projector/group, mail setting, search range setting, or system
Automatic projector search and reloading of projector status can be
"ProjectorView Global+" will be ended. However, you cannot exit the
application during the automatic projector search and the projector
status loading. Even during the projector status acquisition, you can
exit the application forcefully by clicking the
corner of the main screen. In this case, Windows warning message is
The version information is displayed.
You can make various settings using Telnet. (supported projectors only)
You can set the password, ProjectorView display language, LAN
control, and PJLink certification. For details, see page 28.
You can control each projector separately using a Web browser.
In case of an error in the projector, the details of the error are displayed.
For details, see page 22.
You can set the IP address, subnet mask, and default gateway of the
projector. You can type them manually or set them automatically using
You can display a line of any text on the projector screen (Visual PA
enabled projectors only).
For details,see page 27.
All projectors currently displayed on the projector list can be set to
All projectors currently displayed on the projector list can be set to non-
Remote Controller window can be displayed to operate the projector.
You can obtain the projector status, turn on/off the power, select the
input source, and turn on/off the mute.
button at the upper right