Key Operator Programs; Key Operator Program List; Using The Key Operator Programs - Sharp AR-M280 Operation Manual

KEY OPERATOR PROGRAMS

This section explains the key operator programs that are related to the network scanner feature of the machine. For
key operator programs that are related to the printer and copy functions of the machine, refer to KEY OPERATOR'S
GUIDE and "Operation manual (for copier)".
NOTE
You may not be able to use all of the programs in the key operator program list. Programs that you can use will depend on what
peripheral devices are installed on the machine.

KEY OPERATOR PROGRAM LIST

Program name
Image send settings
Operation settings
Default display setting
The number of direct address keys displayed setting
Must input next address key at broadcast setting
Initial resolution setting
Default verification stamp
Scan to E-mail initial status settings
Default sender set
Initial file format setting
Compression mode at broadcasting

USING THE KEY OPERATOR PROGRAMS

To use a key operator program, follow the procedure on page 6 of KEY OPERATOR'S GUIDE. (Please carefully read
"Supplementary explanation of key operation for key operator programs " on the same page.) For explanations of each
setting, refer to the following pages.
Page
26
26
26
26
26
27
27
27
25