Ricoh 3030 Operating Instructions Manual page 143

D
Specify the original position.
Check the orientation of the placed document, and then press
Make sure that the specified original position matches the orientation of orig-
inals loaded in the ADF.
E
Specify the page opening orientation from [Top to Top] or [Top to Bottom].
F
Specify the transmission mode from [2 Sided from 1st Page] or [1 Sided for 1st
Page], and then press [OK].
The selected original position and page opening orientation are shown above
the highlighted [2 Sided Original].
To cancel this mode, press [Cancel]. The display returns to that of step
Select [2 Sided from 1st Page] to send a two-sided original from the first page.
Select [1 Sided for 1st Page] if you want to send a cover letter as the first page.
G
Press [OK].
H
Specify a destination, and then press the {Start} key.
Sub Transmission Mode
or .
C
.
133
2